Onkyo 5.1CH 3D Ready Home Theater System
Friday, January 18, 2013
You guys, seriously, stop laughing. I brought you over to watch a movie on my Onkyo 5.1 Channel 3D Ready Home Theater System but I need you to tell me if it’s a good movie. See, I have this condition that prevents me from identifying entertainment. Yeah, I suppose it is sort of like that Memento movie.
Was that a good movie?
Anyway, I want to make sure I’m getting my money’s worth from the four HDMI inputs, precision-matched surround speakers, and subwoofer. Okay, good point. I guess if I’m unable to detect entertainment I probably didn’t need this in the first place.
| System: | |
|---|---|
| Channels: | 5.1 |
| Total Power: | 660W |
| Power: | 110W per channel (6?, 1kHz, FTC) |
| Subwoofer Output: | 130W (passive) |
| Audio Processing: |
Dolby Decoder: TrueHD, DD Plus DTS Decoder: DTS-HD Master Audio Onkyo Game Surround Modes Audyssey Dynamic EQ Audyssey Dynamic Volume Music Optimizer |
| Inputs: |
(4) HDMI v1.4a with 3D video & ARC support (2) Digital Audio (optical) (1) Digital Audio (coaxial) (6) Analog Audio (1 front) (5) Composite (1 front) (2) Component Video (1) FM Antenna (1) AM Antenna |
| Outputs: |
(1) HDMI (1) Analog Audio (2) Composite (1) Component Video (6) Speaker Terminals (L/R, Subwoofer) (2) Front B Speaker Terminals (L/R) (1) Headphones (front) |
| Other Ports: |
(1) Universal Port (1) RI Remote Control |
| Video: | |
|---|---|
| Input Sensitivity: |
1.0 Vp-p/75? (Component) 0.7 Vp-p/75? (Component PB/CB, PR/CR) 1.0 Vp-p/75? (Composite) |
| Frequency Response: | 5Hz – 100MHz (0 dB, -3 dB) |
| Tuner: | |
|---|---|
| Frequency Range: |
FM: 87.5MHz – 107.9MHz AM: 530kHz – 1710kHz FM/AM Preset Memory: 40 Stations |
| Speakers: | |
|---|---|
| Speaker: |
Front: Full-Range, Bass Reflex Center: Full-Range, Bass Reflex Surround: Full-Range, Bass Reflex Subwoofer: 8″ Down Firing, Bass Reflex |
| Drivers: |
Front: 3.25″ Cone Center: 3.25″ Cone Surround: 3.25″ Cone Subwoofer: 8″ Cone |
| Frequency Response: |
Front/Center: 80Hz – 20kHz Surround: 80Hz – 20kHz Subwoofer: 30Hz – 150Hz |
| Output SPL: |
Front: 81 dB/W/m Center: 81 dB/W/m Surround: 80 dB/W/m Subwoofer: 83 dB/W/m |
| Max Input Power: |
Front/Center/Surround: 120W Subwoofer: 130W |
| Impedance: |
Front/Center/Surround: 6? Subwoofer: 6? |
| Dimensions: |
Front: 4″(W) x 9.13″(H) x 4.69″(D) Center: 19.06″(W) x 4.06″(H) x 4.5″(D) Surround: 4″(W) x 6.31″(H) x 4.5″(D) Subwoofer: 11.63″(W) x 13.56″(H) x 14.5″(D) |
| Weight: |
Front: 1.8 lbs Center: 1.8 lbs Surround: 1.5 lbs Subwoofer: 14.1 lbs |
| Amplifier: | |
|---|---|
| Channels: | 5.1 |
| Power Output: |
Front L/R: 110W per channel (6?, 1kHz, FTC) Center: 110W (6?, 1kHz, FTC) Surround L/R: 110W per channel (6?, 1kHz, FTC) |
| Dynamic Power (front): |
160W (3?) 125W (4?) 85W (8?) |
| THD+N: | 0.08% (20Hz – 20kHz, Half Power) |
| Damping Factor: | 60 (Front, 1kHz, 8?) |
| Input Sensitivity & Impedance: | 200 mV/47 k? (Line) |
| Output Level & Impedance: | 200 mV/470? (Rec out) |
| Frequency Response: | 20Hz – 50kHz/ +1 dB, -3 dB (Direct Mode) |
| Tone Control: |
?10 dB, 50Hz (Bass) ?10 dB, 20kHz (Treble) |
| Signal to Noise Ratio: | 100 dB (Line, IHF-A) |
| Speaker Impedance: | 6 – 16? |
| Power Supply: | AC 120 V, 60Hz |
| Power Consumption: | 3.5A |
| Dimensions: | 17.1″(W) x 6.9″(H) x 12.9″(D) |
| Weight: | 16.5 lbs |
In the box:
- Onkyo 5.1-Channel Receiver
- (2) Front Speakers
- (2) Surround Speakers
- Center Speaker
- Subwoofer
- FM Antenna
- AM Loop Antenna
- Remote Control
Comments
Comments are closed.